BLADE SHARPENING PROCEDURE
VA4000 SLICERS
WORK INSTRUCTION
WI-MAINTENANCE-003; BLADE SHARPENING
REVISION:
02
DATE:
09-07-16
AUTHOR
: G. IDE
Page 5 of 11
10.5.
INSTALL THE SHARPENER
10.6.
INSTALL THE SHARPENER
ATTENTION!
Risk of Injury.
Trained personnel ONLY!
10.7. Open the thickness plate to maximum
distance by rotating the thickness dial
counter clockwise until it stops.
10.8. Remove the liquid collecting trays.
10.9. Lift up the end piece holder.
10.10. Move the Food Bar to the front of the
carriage.
10.10
Manually adjust the carriage, so that its front
edge aligns with the sharpening label on top
of the machine.
10.11
We suggest covering the drive shaft with a
cloth or cup to prevent the grinding dust
from accidentally entering into the drive
shaft.
10.9
10.10
10.10