![background image](http://html2.mh-extra.com/html/jabiru/j160/j160_technical-manual_3118859030.webp)
Aircraft Technical Manual
Jabiru Aircraft
Pty Ltd
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated: 29th October 2014
Issued By: AS
Page: 30 of 298
3
Maintainer Requirements (all J-Series)
The following are recommended as the minimum requirements for someone carrying out
maintenance & inspection on Jabiru Aircraft:
3.1
Facilities
An enclosed workspace with sealed floor, adequate lighting, compressed air & mains electricity.
3.2
Training
For engines: completion of an approved instruction course specific to Jabiru Engines. Approved
courses include those offered by Jabiru Aircraft Australia or by local Jabiru Aircraft representatives.
Airframe: completion of an approved instruction course specific to Jabiru Aircraft. Approved courses
include those offered by Jabiru Aircraft Australia or by local Jabiru Aircraft representatives.
3.3
Rating
Commercial maintainers must hold suitable ratings as required by their local Airworthiness Authority.
3.4
Experience
A minimum of 2 years experience working on aircraft under supervision is recommended for
commercial maintainers before working un-supervised.
3.5
Tool & Gauge Control
Tool & gauge control is an important part of aviation maintenance systems. Tools & gauges must be
accurate enough for the intended use (i.e. a 12” steel ruler is not the appropriate tool to use to
measure the cylinder bore diameter) & be accurately calibrated by an approved laboratory.
Calibrations must be kept up to date. This means a check calibration every year or more frequently
for regularly used, critical tooling.
Even quality equipment will wear over time so items like reams and go / no-go gauges must
periodically be checked to ensure they remain within limits.
3.6
Tools:
Access to the following tools will be required. All tools must be good quality items:
Imperial Allen keys
Circlip pliers
Pliers: long nose, regular square jaw, side cutters
Ring/open end
spanners: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 10mm, 17mm
Ratchet 3/8” drive, breaker bar, 2” extension bar, 3/8”, 7/16”, 1/2” sockets, 7/16” tube socket, 18mm
spark plug socket
Screwdrivers: flat blade and Phillips head in various sizes
Feeler gauges: metric and imperial sizes
Punch set
Torque wrench: 3/8” drive, “name” brand (Snap-On, Warren & Brown etc), recently calibrated. The
wrench must have a suitable scale for use on the fasteners typically found on Jabiru Aircraft
– for
example a wrench with a scale from 20
– 100 lb.ft is unsuitable.
Adjustable reams
Picks / probes
Good quality wire strippers. Terminal crimp pliers, terminals, heat shrink etc.
Safety wire pliers & 0.032” stainless steel safety wire.
Inspection mirror / Boroscope