![background image](http://html2.mh-extra.com/html/jabiru/j160/j160_technical-manual_3118859188.webp)
Aircraft Technical Manual
Jabiru Aircraft
Pty Ltd
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated: 29th October 2014
Issued By: AS
Page: 188 of 298
6.72.3 Rudder Centring System Inspection & Repair
Required Tools:
N/A
Parts and Material:
N/A
Type of Maintenance:
Line Maintenance
Level of Certification:
L1, L2 or LAME (Owner, A&P or LSA Repairman / Maintenance)
Return to Service:
L1, L2 or LAME (Owner, A&P or LSA Repairman / Maintenance)
Ensure lock nuts are secure
Visually inspect the system for damage, wear and corrosion.
6.72.4 Rudder Centring System Installation
To install reverse the removal procedure given above.
WARNING
All spherical rod end bearings must be fitted with a large washer on the outside of the through-
bolt to prevent the bearing case and cable releasing in the event of a bearing failure.
Figure 136
– Steering/Rudder Centring Assy – Type 1 (all J-Series)