27
7.5.7 EDID
Interface Introduction:
The interface is used to set up the EDID for each input port or all input ports at once.
Input Section
: Format Example – “1080P >> Type-C” Where 1080P designates the
EDID selected for the input and Type-C designates the input port the EDID
information is applied to. Assign EDID to each input independently or to all inputs.
EDID Section
: There are two built-in EDID options; 4K@30Hz and 1080P.
Operating Instructions
Select the input port that needs customized EDID in the INPUT section
("ALL" = all
input sources),
actively selected input ports will turn blue.
Select the desired EDID
(4K30 or 1080P)
to be used in the EDID section, and click
"Apply" to complete the setting.
7.5.8 Audio Output Setting
Interface Introduction:
The interface is used to mute or delay the audio of one output or all outputs.
indicates the audio is muted.
indicates the audio is enabled. Default
mute and delay settings are “audio enabled” and the “delay = 30ms”.
