24
Note: 1.
Screens under the same cascade layer can be connected to any output port in
this layer.
2.
The positions of Map1 to Map9 are fixed as in the example, while there are no
limitations for the HDMI output ports order.
Video Map of Video Wall Mode
Ex 2
：
Select HDMI port as input source to make a 4x3 video wall by 2 devices.
Operation Steps of Device1:
(1) In the Output section of the first device, set the "Horizontal" setting to “4”,
"Vertical" setting to “3” and the "Equipment Cascade" setting to “
1”,
which
represents that the current JTECH-VW09 is in the first cascading layer position
(1 of 2).
(2) Then click "HDMI" in the Input section.
Operation Steps of Device2:
(3) In the Output section of the second device, set the "Horizontal" setting to “4”,
"Vertical" setting to “3” and the "Equipment Cascade" setting to “
2”,
which
represents that the current JTECH-VW09 is in the second cascading layer
position (2 of 2).
(4) Then click “HDMI in the Input section
(connected to HDMI Output of Device 1).
