IXSEA AR861B2S, Руководство пользователя

Страница: 26 / 31

M U _ O C E A N O 2 5 0 0 S - U n i v e r s a l _ U K
I ss u e 10
3 0 •05 •07 24
This document is the property of IXSEA and shall not be reproduced nor transmitted without written approval
screw, the assistance of a second operator may be required who will hold the instrument in place while
unlocking the mechanism).
Picture 9 Picture 10 Picture 11
Opening /closing tool in View of end plate partly View of upper end plate
place opened partly opened
Step 5 : remove the end plates
•
Gently pull on the upper end plate (transducer end) along its axial direction until you can access the
internal transducer plug.
Unplug the transducer head connector (brown flat 3 pins plug).
Keep on removing the upper end plate with is integral internal strength member.
•
Install it on a clean surface, paying special attention to sealing surfaces and O’Ring
•
Gently pull on the lower end plate which is integral with motor assembly and electronic / battery
package and remove the whole from the pressure housing.
•
Install it on a clean surface, paying special attention to sealing surfaces and O’Ring
•
Save the pressure cylindrical housing in a secure place. Protect or be sure that its sealing surfaces will
not be damaged during the whole operation
Picture 12 Picture 13 Picture 14
Upper end plate electric Upper end plate removed. Lower end plate removed
transducer’s plug