Leg Extension Assembly
(IF APPLICABLE)
NO TOOLS REQUIRED:
STEP 1:
Tilt or hoist the core unit assembly off the
ground. Now the leg extensions can be attached.
STEP 2:
Slide the leg extension around the three
legs of the machine core unit assembly and above
the bottom flange ring.
STEP 3:
Slide the leg extension up snug against
the leg to allow two pins to be inserted through the
holes of the leg extension.
STEP 4:
Fasten the leg extension to the machine
Core unit assembly using a set of two 5/16 inch x
2 inch (8mm x 51mm) clevis pins.
STEP 5:
Secure both pins using two hair pins.
STEP 6:
Repeat steps 2 through 5 for each leg
extension.
NOTE:
Once the leg extensions are attached and
secure, the leg extensions act as a tri-pod in which
the machine can rest on.
Sliding Leg Extension Around Bottom
Leg Of Core Unit
Attaching Leg Extension With a Clevis Pin
Securing Clevis Pins
Secured with Hair pins
©2022 IXOM Watercare Inc. | www.ixomwatercare.com | 866 - 437 - 8076 | [email protected]
Equipment Assembly
458_10264_20220110
O&M_SB5000PW_10272_20220119 - 22
