IXIA BreakingPoint 20, Руководство по установке

Страница: 35 / 65

Task 10: Creating a Test
BreakingPoint 20 Installation Guide 24 BreakingPoint Systems Inc. © 2005-2015
Note:
Click the
Open network neighborhood screen
link to modify the Network
Neighborhood. Once you have made your changes, click the
Return
button to go back to
the DUT and Network Neighborhood selection screen. For more information on Network
Neighborhoods, see the section
Task 8: Creating a Network Neighborhood on
page 17
.
5. Click the
Accept
button once you have made selections for the DUT Profile and Network
Neighborhood.
6. Click
Add a test component
from the Test Quick Steps menu.
7. Select the test component to be added to the test.
8. Do any of the following:
• Click the
Information
tab.
n
Enter a new name for the test component in the
Name
field. (Optional)
n
Enter a new description for the test component in the
Description
field. (Optional)
n
Enable or disable the
Active
check box. (Optional)
n
Enable or disable the Include in Report check box. (Optional)
n
Click the
Apply Changes
button when done.
• Click the Interfaces tab.
n
Select the interface(s) that will act as the client. The interface(s) you select must be mapped to a port.
n
Select the interface(s) that will act as the server. The interface(s) you select must be mapped to a port.
n
Click the
Apply Changes
button when done.
• Click the Presets tab.
n
Select a Component Preset.
n
Click the
Apply Changes
button when done.
• Click the
Parameters
tab.
n
Adjust any parameters for the test component.
n
Edit the Evasion Profile settings.
(Optional, for the Security component only)
n
Click the
Apply Changes
button when done.
9. Repeat Step 6-8 for each test component you want to add to the test.
10. Click the
Define Test Criteria from the Test Quick Steps menu and create the pass/fail
criteria for the test. For more information on pass/fail criteria, see the section Test Pass/Fail
Criteria in the user guide.
11. Click the Save As button.
12. Enter a name for the test in the Name field.
13. Click Save and Run from the Test Quick Steps menu to run the test.