manualshive.com logo in svg

IXIA BreakingPoint 20, Руководство по установке

Поделиться
Скачать
IXIA BreakingPoint 20 Скачать руководство пользователя страница 2

2

BreakingPoint 20 Installation Guide, Release 3.4

Copyright © 1/21/15 Ixia. All rights reserved.

This publication may not be copied, in whole or in part, without Ixia’s consent.
RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the U.S. Government is subject to the 
restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at 
DFARS 252.227-7013 and FAR 52.227-19.

Ixia, the Ixia logo, and all Ixia brand names and product names in this document are either trademarks or 
registered trademarks of Ixia in the United States and/or other countries. All other trademarks belong to their 
respective owners.

The information herein is furnished for informational use only, is subject to change by Ixia without notice, and 
should not be construed as a commitment by Ixia. Ixia assumes no responsibility or liability for any errors or 
inaccuracies contained in this publication.

Corporate 
Headquarters

Ixia Worldwide Headquarters
26601 W. Agoura Rd. 
Calabasas, CA 91302 
USA 
+1 877 FOR IXIA (877 367 4942) 
+1 818 871 1800 (International) 
(FAX) +1 818 871 1805 

[email protected]

 

Web site: 

www.ixiacom.com

 

General: 

[email protected]

 

Investor Relations: 

[email protected] 

Training: 

[email protected] 

Support: 

[email protected] 

+1 818 595 2599
For the online support form, go to:

http://www.ixiacom.com/support/
inquiry/

BreakingPoint 
Systems

Ixia BreakingPoint Systems
3900 N. Capital of Texas Hwy., Ste. 180
Austin, TX 78746
USA
+1 512 821 6000

[email protected]

Web site: 

www.breakingpoint.com 

General: 

http://www.ixiacom.com/

products

 

Support: 

[email protected]

+ 1 818 595 2599

EMEA

Ixia Technologies Europe Limited 
Part 2nd floor, 
Clarion House, Norreys Drive
Maidenhead, UK  SL6 4FL
+44 (1628) 408750 
FAX +44 (1628) 639916

[email protected]

 

Support:

 [email protected] 

+40 21 3015699
For the online support form, go to:

http://www.ixiacom.com/support/
inquiry/?location=emea

Asia Pacific

Ixia Pte Ltd 
210 Middle Road 
#08-01 IOI Plaza 
Singapore 188994 

Support: 

Support-

[email protected] 

+65 6332125 
For the online support form, go to:

http://www.ixiacom.com/support/
inquiry/

Содержание BreakingPoint 20


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды