REL1.0
Page 9 of 58
iWave Systems Technologies Pvt. Ltd.
Zynq-7000 SoC SODIMM Development Platform Hardware User Guide
2.2
Zynq-7000 SoC SODIMM Carrier Board Features
The Zynq-7000 SoC SODIMM carrier board supports the following features to validate the Zynq-7000 SoC SOM
SODIMM Edge Connector features.
Serial Interface Features
•
Debug UART through USB MicroAB Connector
Communication Features
•
Gigabit Ethernet through RJ45MagJack x 1
•
USB2.0 OTG through MicroAB Connector x 1
•
SDIO through Micro SD Connector x 1
Expansion Connectors
•
FMC High Pin Count (HPC) Connector x 1
➢
Upto 98 Single ended (SE) IOs/39 LVDS IOs
•
12pin PMOD Host Port Connector x 2
➢
16 Single ended (SE) IOs (8 IOs on each connector)
Additional Features
•
JTAG Connector x 1
•
Power ON/OFF DIP Switch x 1
•
Reset Pushbutton Switch x 1
•
RTC Coin Cell Holder x 1
General Specification
•
Power Supply : 5V Power Input Jack
•
Form Factor
: 100mm X 72mm
Note: In Zynq-7000 SoC, PL Bank13 is not available in Z-7007S and Z-7010 devices and so Bank13 IOs (20 SE IOs) on
FMC connector & Pmod connector1 is NC in Z-7007S and Z-7010 SoC based SODIMM DevKit.
