iWave Zynq-7000 SoC, Руководство пользователя по оборудованию

Страница: 49 / 58

REL1.0
Page 49 of 58
iWave Systems Technologies Pvt. Ltd.
Zynq-7000 SoC SODIMM Development Platform Hardware User Guide
Table 6: Pmod Connector1 Pin Out
Pin
No
Signal Name
Signal Type/
Termination
Description
1 PL_IO_L6P_T0_35 IO, 3V3 LVCMOS General purpose Input Output.
2 L_IO_L6N_T0_VREF_13 IO, 3V3 LVCMOS General purpose Input Output.
3 PL_IO_L6N_T0_VREF_35 IO, 3V3 LVCMOS General purpose Input Output.
4 PL_IO_L19N_T3_VREF_34 IO, 3V3 LVCMOS General purpose Input Output.
5 GND Power Ground.
6 VCC_3V3 O, 3.3V Power 3V3 Supply Voltage.
7 PL_IO_L19P_T3_35 IO, 3V3 LVCMOS General purpose Input Output.
8 PL_IO_L19N_T3_VREF_35 IO, 3V3 LVCMOS General purpose Input Output.
9 PL_IO_0_34 IO, 3V3 LVCMOS General purpose Input Output.
10 PL_IO_L3N_T0_DQS_34 IO, 3V3 LVCMOS General purpose Input Output.
11 GND Power Ground.
12 VCC_3V3 O, 3.3V Power 3V3 Supply Voltage.
Note: If IO voltage of PL Bank34 and Bank35 is changed in Zynq-7000 SoC SODIMM SOM, then the IO voltage of
corresponding PL Bank IOs in this Pmod connector1 will also change.
Note: In Zynq-7000 SoC, PL Bank13 is not available in Z-7007S & Z-7010 devices and so Bank13 IOs on Pmod
Connector1 pin2 is NC in Z-7007S & Z-7010 SoC based SODIMM DevKit.
Table 7: Pmod Connector2 Pin Out
Pin
No
Signal Name
Signal Type/
Termination
Description
1 PL_IO_L19P_T3_34 IO, 3V3 LVCMOS General purpose Input Output.
2 PL_IO_L13N_T2_MRCC_34 IO, 3V3 LVCMOS General purpose Input Output.
3 E_PL_IO_L16P_T2_35 IO, 3V3 LVCMOS General purpose Input Output.
4 PL_IO_L16N_T2_35 IO, 3V3 LVCMOS General purpose Input Output.
5 GND Power Ground.
6 VCC_3V3 O, 3.3V Power 3V3 Supply Voltage.
7 PL_IO_25_34 IO, 3V3 LVCMOS General purpose Input Output.
8 PL_IO_L24N_T3_34 IO, 3V3 LVCMOS General purpose Input Output.
9 PL_IO_L6P_T0_34 IO, 3V3 LVCMOS General purpose Input Output.
10 PL_IO_L6N_T0_VREF_34 IO, 3V3 LVCMOS General purpose Input Output.
11 GND Power Ground.
12 VCC_3V3 O, 3.3V Power 3V3 Supply Voltage.
Note: If IO voltage of PL Bank34 and Bank35 is changed in Zynq-7000 SoC SODIMM SOM, then the IO voltage of
corresponding PL Bank IOs in this Pmod connector2 will also change.