REL1.0
Page 29 of 58
iWave Systems Technologies Pvt. Ltd.
Zynq-7000 SoC SODIMM Development Platform Hardware User Guide
2.6
Expasnion Connectors
2.6.1
FMC Connector
The Zynq-7000 SoC SODIMM carrier board supports one 400Pin Standard FMC HPC connector for FPGA IOs
expansion. This 400Pin FMC HPC connector is physically located at the top of the board as shown below.
This FMC connector supports 98 Single Ended (SE) IOs/39 LVDS IOs from Zynq-7000 SoC PL Banks.
•
Upto 38 Single Ended (SE) IOs/19LVDS IOs from PL Bank34
o
Upto three clock capable SE IOs/ LVDS IOs (one MRCC and two SRCC)
•
Upto 40 Single Ended (SE) IOs/20 LVDS IOs from PL Bank35
o
Upto three clock capable SE IOs/ LVDS IOs (one MRCC and two SRCC)
•
Upto 20 Single Ended (SE) IOs from PL Bank13
o
Upto four clock capable SE IOs (two MRCC and two SRCC)
Note: In Zynq-7000 SoC, PL BANK13 is not available in Z-7007S and Z-7010 devices and so BANK13 IOs (20 SE IOs) on
FMC connector is NC in Z-7007S and Z-7010 SoC based SODIMM DevKit.
Figure 7: FMC HPC Connector
