REL1.0
Page 53 of 58
iWave Systems Technologies Pvt. Ltd.
Zynq-7000 SoC SODIMM Development Platform Hardware User Guide
3.
TECHNICAL SPECIFICATION
This section provides detailed information about the Zynq-7000 SoC SODIMM Carrier Board technical specification
with Electrical, Environmental and Mechanical characteristics.
3.1
Electrical Characteristics
3.1.1
Power Input Requirement
The Zynq-7000 SoC SODIMM Carrier Board is designed to work with 5V external power and uses on board voltage
regulators for internal power management. 5V power input from an external power supply is connected to the Zynq-
7000 SoC SODIMM Carrier Board through Power Jack (J9). This 1.3mm x 3.8mm barrel connector Jack should fit
standard DC Plugs with an inner dimension of 1.35mm and an outer dimension of 3.5mm. This connector is
physically placed at the top of the board as shown below.
Figure 14: Power Jack
The below table provides the Power Input Requirement Zynq SODIMM Carrier Board.
Table 9: Power Input Requirement
Sl. No.
Power Rail
Min (V)
Typical (V)
Max(V)
Max Input Ripple
1
VCC_5V
4.75V
5V
5.25V
±50mV
2
VRTC_3V0¹
2.8V
3V
3.3V
±20mV
¹
The Zynq-7000 SoC SODIMM DevKit
uses this voltage as backup power source to RTC controller when VCC is off.
