4
6X-1050a
3960 CAMERA
INSTALLATION AND OPERATION
Table 1. Specifications
SYSTEM RELATED
Pan/Tilt Driver
Angular Travel
360° continuous pan range; -90 to +90 tilt range
P/T Speed (preset)
160° / sec
Pan Speed (manual)
0.1° to 80° sec
Tilt Speed (manual)
0.1° to 40° sec
Preset Accuracy
>0.1°
Power Input
89 V ac to 135 V ac; 120 V ac nominal, 60 Hz; per NEMA 2.1.2 Std TS2 for
traffic control systems
24 V ac optional
Power Consumption
70 W max with heaters
Power Transient Interruptions
NEMA 2.1.6 TS2
Weight
15 pounds (7 kg)
Environmental
-34° to 74° C (-29° to 165° F);
Conforms to NEMA 2.1.5.1 Standard TS2 for traffic control systems
Presets
64 preset positions
Title Generation
2 lines of 24 characters each for camera ID;
Preset ID, sector ID, privacy zone;
Low pressure alarm, temperature readout, pressure readout
Tours
8, each consisting of 32 presets with dwell time per preset per tour
Sectors
16 in the horizontal plane
Privacy Zones
8 programmable zones can be set for video blanking
Cloning
Positioner settings (presets, titles, etc.) can be stored to file for easy duplication
Inverted Operation
Can be mounted in an inverted position; software compensates for inversion
Vibration (less lens)
Sine vibration from 5 to 30 Hz, 1/2 g, 3 axis one hour
Shock
Up to 10 g's, 11 ms, in any axis under nonoperating conditions
Air Contaminants
Withstands exposure to sand, dust, fungus, and salt atmospheres per MIL-E-
5400T, paragraph 3.2.24.7, 3.2.24,8, and 3.2.24.9
Acoustical Noise
Can withstand environments >150 dB continuously to 30 minutes
EMI
FCC rules, part 15, subpart J, for class A devices
available protocols are listed in the Protocol Options
section of the Model Index shown in figure 2. Some
of these protocols may not support all functions of
the 3960.
1.2 Mechanical Characteristics
Dimensions are shown in figure 8. The 3960
consists of a sealed, pressurized camera module
mounted together with a high performance
positioner (pan/tilt unit) that is sealed from rain,
dust, dirt, and other undesirable contaminants. The
pan/tilt assembly is environmentally sealed but not
pressurized.
The moulded housing provides an integral sun
shield over the camera module housing to prevent
heat build up that could result from direct sun light
on the camera module housing.
