7
STATIC Weighing Method & System Calibration
Calibration of the Empty Bucket / Forks
Lower the empty bucket or forks to the ground
(No hydraulic pressure in the lifting circuit)
•
To access the calibration function press the “
M
” key and hold it down for 5 seconds.
•
After 5 seconds, the
MODE
display digit will show “
0
”. This means that the system is ready for
automatic
zeroing of the scale.
MODE
Five Digits Load Weight Readout Display in %
0
•
Lift the empty bucket (
fully crowded
) or forks or any other attachment
just above the ground.
(Activate the lift control valve, as you would do during the normal lifting operation.
•
Wait a few seconds, the display will go blank and then it will show
0
in the furthest right digit display
(Digit 1).
(If scale previously calibrated than could be 0 or any other number already in the system)
MODE
Five Digits Load Weight Readout Display in %
1
0
Automatic zeroing of lifted empty bucket / forks (or any other attachment) is done!
