25
Right Button
: Reset and print function of accumulative load weights
Every time the indicator shows the load weight and the right button is pressed, the current load weight
or current total weight in the counter will be reset. In the case of the system equipped with onboard
printer,
the weight ticket will be printed.
The last load weight readout will be shown, until forks
lowered
.
Sample of accumulative load weight ticket
#01 = 01200
#02 = 01080
#03 = 01060
TOTAL = 3340
Note:
The maximum number of freight load weights entered into the accumulative counter at the time is 40.
If the number of 40 loads has been reached, display will show the current total weight of all 40 loads weight
entered.
This current total weight will stay and “flash” on the instrument display for a moment. The current
accumulative counter of all 40 loads weight will be reset automatically and you can start the new cycle
again. (
The current accumulative counter of all 40 load individual weights and total weight will be printed out
when onboard printer is connected
).
Two Weighing Channels Function
(ED2-2X Series)
Weighing Channel 1
Weighing Channel
2
Overload Warning Function
(ED2-SM and ED2-SM-OAS Series)
Every time the pre-set overload weight load is reached display will indicate a current weight, display will
“flash”. If the system has been specified to include audio warning, than the buzzer will come on as well. To
stop display “flash” and turn the buzzer off, lower the load to the ground. The overload warning function will
operate as well on the SkidWeigh systems with two independent weighing channels.
Explanation for SkidWeigh Weighing Tolerance
Weighing Accuracy is /- 0.5% to +/- 1% of the vehicle lifting capacity.
Example:
If a forklift truck’s maximum lifting capacity is 3000 pounds; then the weighing readout accuracy of vehicle is /- 15
pounds in lower load weighing range and +/- 30 pounds in the higher load weighing range.
