17
Accumulative Load Weight & Printouts With Onboard Printer:
Left Button
:
Accumulative Function for load weights
Right Button
: Print/Reset
Every time the indicator display shows the load weight and the
right button
is pressed, the current load
weight ticket will be printed and the system load weight counter will be RESET.
Example of single load weight being printed:
IVDT Skidweigh
4380
Every time the indicator shows the load weight and the
left button
is pressed, the load weight will be added
into a load weighing counter. It will also show the current total weight of all load weights entered in the load
weight counter.
(A quick “blink” on the display indicates that the current load weight has been added into the
counter)
At any point you can obtain a ticket for all entered load weights stored in the load weighing counter by
pressing the
right button
. The printout will show all individual load weights and total weight. As soon as
you lower the forks and the last load weight is no longer on the display, the system will be RESET.
Example of two load weights added in the weighing counter and being printed:
IVDT SkidWeigh
#01 = 01550
#02 = 01000
TOTAL = 2550
The maximum number of load weights entered into the accumulative load weigh counter is 40. If the
number of 40 loads has been reached, the display will show the current total weight of all 40-load weights
entered. This current total weight will stay and “flash” on the instrument display for a moment. The current
accumulative counter of all 40 load individual weights and total weight will be printed out. The system will
reset automatically and you can start the new cycle again.
