6
2.0
P
RODUCT
O
VERVIEW
ITI Non-Conductive Videoscope Kit includes:
(1) ITI Model 178708 Ø8mm Non-Conductive Videoscope
(1) ITI Model 178310 V5 LE Video Case
(2) Battery Pack P/N 122826
(1) Battery Charger P/N 122727
(1) Power Supply P/N 550-072
(1) Receiver (Optional) P/N 122721
(1) Head Up Display (Optional) P/N 122293
(1) ½” Dekoron Hose P/N 914-010
(1) Protective Carrying Case & Foam
ITI Series 178708 Videoscopes are long, small diameter, flexible tubes containing a high resolution color
camera chip with lenses at the distal tip. The chip camera carries video signals by wires that terminate in a
multi-pin connection extending from the operation handle. The flexible tube also contains:
1) 4-way articulation wires enabling distal tip movement.
2) Fiber optics for illumination.
The flexible tube is composed of an internal coil for crush resistance, braided wall reinforcement for torsional
strength, and a plastic external layer as a flexible and environmental resistance seal. Videoscope models also
employ a tungsten metal exterior braid for durability in sharp edged and abrasive environments. Other models
use only non-conductive external materials to prevent shorting of electrical equipment being viewed.
Always consult this manual and ITI representatives before employing this
product in a high electrical powered application to prevent injury or death.
Videoscopes are normally used to view or inspect into inaccessible or hazardous environments when only
limited access is available. The articulation control enables the operator to move the tip around for general
observation and/or inspection.
The Videoscope is connected to the V5 LE Videoscope System. The V5 LE Videoscope System contains the
controls to operate the Videoscope
’s camera (see Figure 1).
F
IG
.
1:
V5
LE
V
IDEOSCOPE
C
ONTROLS
S
YSTEM
DANGER: