
22
The V5 LE Videoscope System is designed to operate using external AC power supply or internal 12VDC supply.
The V5 LE will automatically switch to internal 12 VDC if the AC power supply is disconnected. If the AC power
supply is reconnected while running on internal 12VDC then the system will automatically switch to the 115VAC
power supply.
9.1
B
ATTERY
P
ACK
S
PECIFICATIONS
:
Chemistry: Li-Ion
Capacity :10.4Ah
Voltage: 14.8V (Peak at 16.8V)
PCB: Protection Circuit Module
–
built-in IC chip prevents the battery
pack from over charge and over
discharge prolonging the battery life
Dimensions: 5.75” x 2.88” x 1.50”
Weight: 1.73 lbs
F
IG
.
9:
B
ATTERY
P
ACK
WARNING:
Li-ion cells are very sensitive to charging characteristics and if mishandled may
explode.
NOTICE
:
User should have enough knowledge about Li-Ion rechargeable batteries for proper use.
Only the recommended battery charger (see Battery Charger section) should be used to charge the
battery pack. ITI Instrument Technology is not responsible for any damages caused by misuse or
mishandling of the Li-Ion battery pack.
9.2
B
ATTERY
C
HARGER
S
PECIFICATIONS
:
1. Input Voltage: 110-240 VAC, 50/60 Hz
2. Charger Type: Li-Ion / Li-polymer Battery Pack (14.8 V 4 cells)
3. Charging Current: 1.5A
4. Built in IC to cut off power automatically when battery is fully charged.
The Videoscope System kit is supplied with one battery pack charger and a power cord. Charger output is
equipped with a jack connector that mates with the battery pack plug. The charger is supplied with an IEC AC
cord which has an IEC-C13 socket.
F
IG
.
10:
B
ATTERY
C
HARGER