26
F
IG
.
12: T
RANSMITTER
C
ONTROL
P
ANEL
11.2
R
ECEIVER
P
ACK
(A
CCESSORY
O
PTION
)
Using the V5 LE
Videoscope System’s transmitter with a remote monitor requires a wireless receiver. The ITI
Receiver Pack is compatible with the V5 LE system and requires only a power/video cable configured to mate it
to a 12VDC power supply and a monitor. The receiver is frequently used
with ITI’s Monitor Pack and Head Up
Display, both have a viewing display monitor. The receiver can be configured with a custom cable for use with an
existing monitor and power supply.
Operating Instructions:
1. Connect the 4-pin video cable to the Wireless Receiver
’s 4-socket video out connector.
2. Connect the power supply or the battery pack cable to the power jack found on the side of the receiver..
NOTICE: An LED power indicator light will be illuminated if the receiver is receiving power. If the power
indicator is not illuminated check the electrical connection and power supply.
3. Rotate and raise antenna vertically.
4. Set the Channel Select Switch to the same channel as the transmitter. The channel selector is located
on the Transmitter Control Panel.
NOTICE:
An LED is provided to indicate the transmitted signal is being received. If the signal light is
not illuminated, ensure the receiver channel selector matches the transmitter. Distance and Radio
Frequency (RF) reflecting, retarding, and grounding structures will also degrade the wireless signal
and performance.
F
IG
.
13: W
IRELESS
R
ECEIVER
For additional information consult the Digital Wireless model 176120 operation manual.