27
12.0
H
EAD
U
P
D
ISPLAY
(O
PTION
)
12.1
S
PECIFICATIONS
ITI Model 126395 Heads Up Display includes:
(1)
Monocular Head-Up Display with Inline Interface Control Box and connector
(1) Pair of Eye Glasses
(1) Eye Glasses Protective Case
This kit is intended to provide maximum resolution, portability and quick setup.
12.2 HUD
S
ETUP
CAUTION:
Cameras and HUD are delicate instruments, and should be treated accordingly. Proper
handling and cleaning techniques will greatly increase the life of this instrument. Only trained operators
should handle this equipment.
F
ITTING THE
HUD
The HUD was designed to be mounted on a variety of ballistic eyewear. The HUD has a small clip, resembling a
paper clip that slides onto the edge of the glasses. This clip provides a stable and quickly removable mount to the
eyewear.
F
IG
.
13:
HUD
G
LASSES
U
SING THE
C
ONTROL
B
OX
The top button, coming from the glasses, is Power ON/OFF.
The middle button is used to flip the display from right eye to the left eye.
The bottom 2 buttons are brightness controls and allow you to adjust the brightness up or down,
depending on light conditions.
F
IG
.
14:
I
NLINE
C
ONTROL
B
OX
C
ABLE
C
ONNECTING THE
HUD
ASSEMBLY TO THE VIDEO SOURCE
The HUD connects to the power / video source thru a 4 pin connector attached at the end of the Inline Control
Box cable. For operating instructions, see the attached Head Up Display operations manual.