18
By touching the OSD icon the shown input
screen will appear.
On entry, the cursor appears at the start of
the text line. The text line is 19 characters
long. The first 3 positions are reserved for
the file count number (which cannot be
edited). Use the navigation controls to
enter a 16 character text message to
annotate an image. The cursor is
positioned along the text line using the left
and right arrows. Auto wrap is supported.
To enter the keypad area, use the up
arrow. Dual cursors are displayed, one at
the current text line position and the other
over the character to be selected. To move
around the keypad use the up, down, left,
and right arrows. Auto wrap is supported.
To select a character, in the keypad area
place the cursor over the desired character
and press OK. The selected character will
be placed in the text line bellow at the
current cursor position which is then
incremented along. In the text line,
pressing OK will overwrite the current
cursor position with a space character then
increment the cursor position.
Touch BACK to return to the live video
screen where the single line of text will
appear on the same line as the File Count.
NOTICE:
Vertical movement encompasses both the keypad and text line. So, if you are on the keypad
top line then pressing the up arrow will wrap you to the text line below and only one cursor is displayed.
Similarly, if you are on the text line then pressing the down arrow will wrap you to the keypad top line
with dual cursors appearing.
NOTICE:
The text string is recalled into the text line each time the OSD editor is accessed, allowing
you to edit the previously created text. This text line is volatile and will only be stored while the DVR is
powered on. Cycling the DVR power will clear the text line.
7.1.7
B
ACK
This is the only icon to be displayed on screen at all times. Of course, when no icons are displayed, the BACK
icon will also not be displayed. Touch this icon to go back one step. So, if you are for instance in the PHOTO
GALLERY screen touch BACK to return to the main screen. If you touch BACK in the main screen then all icons
will disappear until the screen is touched again.
7.2
R
ESET
F
UNCTION
If the DVR system does not respond to the touch commands or will not power down in the normal way it may be
necessary to carry out a hard reset to re-initialize the system. To do this, hold down the RESET button (found on
the touch screen panel
– see fig. 7) for 4 seconds or until a series of “beeps” can be heard. After that the LCD
screen will flash briefly and the system will power down.