ITI Regency 4724 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 82

background image

Regency

®

Model 4724 Control Expander Installation Manual (P/N 150596-02, Rev. A)

Revised 8/98

17

DAYS#0:SMTWTFSH

Toggle between the digits 0-7, turning them on and off as necessary, to select the days the win-
dow will be active.

Examples:

1. If you want Time Window #0, which has been programmed to last from 7:00 to 8:30
AM, to be in effect on weekdays, select: -MTWTF- by toggling keys 1 through 5 on and
keys 0, 6 and 7 off.

2. If you want Time Window #3, which has been programmed to last from 8:00 to 9:00
AM, to be in effect on Sundays and holidays, then when you program
DAYS#3:SMTWTFSH, select S------H by toggling keys 0 and 7 on and keys 1 through 6
off.

NUMBER:#1

Select the next time window to program. Continue programming the options for up to 32 time
windows.

NOTE

The easiest way to disable a time window is to go to the Days option (Time Windows, Menu 0)
and deselect all days by pressing

CLR TEST

.

8.2 Access (Menu 1)

Access options and secret codes can be programmed by the user.

NOTE

There are no programming steps for Code 0 (installer's code) and Code 1 (main user's code)
functions because they are fixed. Code 0 can always activate all features, including the
Hexiprogramming mode. Code 1 can activate all control functions (arming, disarming,
bypassing, etc.) and can program all user-programmable options.

The secret codes for Code 0 and Code 1 are programmed in Test mode (see Section 7.6 of this
manual).

NUMBER:#2

Select the access code you want to program options for. Enter the identifying number (Code 2,
Code 3, etc.), not the secret code.

CODE#2:000000

Program the secret code for this access code. The code can be from four- to six-digits in length.
If you will be using the high security code, it must be entered as the secret code for Access
Code 255.

NOTE

Do not begin any codes with the same two digits that are used for the duress trigger. The
duress trigger is programmed under System (Menu 4).

ARS#2:12345678

Select the areas that this code may gain access by toggling the digits 1 through 8 on and off.

DOOR#2:YES

If this option is selected, this code will be able to gain access to doors (within the areas selected
in the previous option).

Press

0

for NO or

1

for YES.

NOTE

The 4724 is not UL Listed for door access control.

«
...
23
24
25
26
27
...
»

Содержание Regency 4724



















































































Отзывы:

Нет отзывов

Похожие инструкции для Regency 4724

Бренд: Lacor Страницы: 90

Бренд: Oster Страницы: 9

Бренд: Edwards Страницы: 2

Бренд: Ace Plus Страницы: 8

Бренд: KVMSwitchTech Страницы: 7

Бренд: Ihse Страницы: 2

Бренд: OBH Nordica Страницы: 32

Бренд: DVIGear Страницы: 10

Бренд: Skymsen Страницы: 8

Бренд: Anntlent Страницы: 11

Бренд: Ocean Matrix Страницы: 2

Бренд: RGBlink Страницы: 12

Бренд: EZCast Pro Страницы: 9

Бренд: Wilson Electronics Страницы: 20

Бренд: Oster Страницы: 8

WattsUp ABD-100-2B

Бренд: Aroma Страницы: 12

LT-2,0 SUPER GOURMET 2

Бренд: Skymsen Страницы: 16

Бренд: Gefen Страницы: 46

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды