Iteris VersiCam, Руководство пользователя

Страница: 49 / 84

User Guide
49
4.7 Load Menu
The "Load" option (Lod) allows the user to load previously saved configurations.
To Load Factory Defaults – Left click “Lod” and left click on “Factory Default”. A warning message will appear,
“Reset system to factory default? Yes No”. Left click on “Yes”. This will clear all zones, unit id, camera labels,
alarms, TOD schedules, options, com port parameters and restore them to factory default settings. Please
note that the inactive channel defaults to call.
To Clear a Camera’s Configuration – Left click “Lod” and left click on “Clr Cam Config”. A warning message will
appear, “Reset this camera config and del all zones? Yes No”. Left click on “Yes”. This will clear all of this
camera’s zones, options, camera alarms and camera label.
• Config 1 - Selecting this configuration will load it, and make it the current configuration.
• Config 2 - Selecting this configuration will load it, and make it the current configuration.
•
Config 3 - Selecting this configuration will load it, and make it the current configuration.
Move the cursor to the configuration that you want to load and run as the current configuration. Left click
the mouse button to make your selection, the configuration will be loaded. Next, you must go to the Quit (Q)
menu and save to that same configuration to complete the load process.

Note:
You can also save one configuration to another from this menu option. For instance, if you
load configuration two, you could go to the Quit (Q) menu and save it to configuration one (or three).
This would overwrite anything previously saved in configuration one and give you another copy of
configuration two in configuration one.
Exit – Click on this option to exit out of the Load menu and return to the main menu bar.