iSys iTerra Elite, Быстрый старт

Страница: 52 / 119

_________________________________________________________________________________________________________________________
PAGE 52 --- iTerra Elite Quick Start Guide © 2008 iSys-The Imaging Systems Group Inc.
Smearing
Press Button 2 once
Display should read
“Fanfold Print Control
Exit: Top Status: Smear
”
Press Button 3 once to save change
Display should read “Fanfold Print Control
Exit: Top Status: Smear
*”
Press Button 4 once to put printer back
ONLINE
Display should read “Cycle Printer Power
Check Print Quality”
Cycle the printer’s power
Run Test Plot to check quality of plot
Repeat these steps until image quality is acceptable
Jamming
Press Button 2
Display should read
twice
“Fanfold print Control
Exit: Top Status:
Stall
Press Button 3 once to save change
Display should read
“Fanfold Print Control
Exit: Top Status: Stall
*”
Press Button 4 once to put printer back
ONLINE
Display should read “Cycle Printer Power
Check Print Quality”
Cycle the printer’s power
Run Test Plot to check quality of plot
Repeat these steps until image quality is acceptable
NOTE: Ensure you are only changing the Status for where your media is exiting the printer.