_________________________________________________________________________________________________________________________
PAGE 20
---
iTerra Elite
Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
7) Press and hold the
ADVANCE
button on the feeder to load paper. (Hold until
green
LED
stops flashing.) Make
sure the paper has tension.
8) If loading paper from a box of more than 800 fanfold sheets, place box directly in front of printer on the floor. Do
not insert paper into tray but simply feed paper through print media slot on bottom of paper tray. Carry on with
steps (2-7).
9) You are now ready to plot.
NOTE:
Step 7 must be repeated any time the green light is flashing. Cycling the printer on and off, as well as
removing paper from the feeder after a jam or other unintended operation, will cause this light to flash.
