Isuzu 2008 i290, Руководство пользователя

Страница: 176 / 384

Radio Messages
CAL, or CAL ERR (Calibration Error): The audio
system has been calibrated for your vehicle from the
factory. If CAL ERR displays, it means that the radio has
not been configured properly for the vehicle and must
be returned to your dealer/retailer for service.
LOC or LOCKED: This message is displayed when the
THEFTLOCK
®
system has locked up. Take the
vehicle to your dealer/retailer for service.
If any error occurs repeatedly, or if an error cannot be
corrected, contact your dealer/retailer.
Playing a CD
If the ignition or radio is turned off, with a CD in the
player, it stays in the player. When the ignition or radio
is turned on, the CD starts playing where it stopped,
if it was the last selected audio source.
When a CD is inserted, the CD symbol displays. As
each new track starts to play, the track number displays.
The CD player can play the smaller 3 inch (8 cm)
single CD with an adapter ring. Full-size CDs and the
smaller CDs are loaded in the same manner.
1 FLD
x
(Previous): This button is inactive when
playing a CD.
2 FLD
w
(Next): This button is inactive when
playing a CD.
3 REV (Reverse): Press and hold this pushbutton to
reverse quickly within a track. Press and hold this
pushbutton for less than two seconds to reverse at
10 times the normal playing speed. Press and hold it
for more than two seconds to reverse at 20 times
the normal playing speed. Release this pushbutton to
play the passage. ET and the elapsed time of the track
displays.
4 FWD (Forward): Press and hold this pushbutton to
advance quickly within a track. Press and hold this
pushbutton for less than two seconds to advance
at six times the normal playing speed. Press and hold it
for more than two seconds to advance at 17 times
the normal playing speed. Release this pushbutton to
play the passage. ET and the elapsed time of the track
displays.
6 RDM (Random): Press this pushbutton to hear the
tracks in random, rather than sequential, order. RDM ON
displays. RDM and the track number displays when
each track starts to play. Press RDM again to turn off
random play. RDM OFF displays.
q
SEEK
r
: Press the left SEEK arrow to go to the
start of the current or the previous track. Press the right
SEEK arrow to go to the start of the next track.
3-54
2008 - Isuzu 290/370 Owner Manual