Isuzu 2008 i290, Руководство пользователя

Страница: 129 / 384

Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
•
G Turn and Lane Change Signals. See Turn
Signal/Multifunction Lever on page 3-7.
•
53 Headlamp High/Low-Beam Changer. See
Headlamp High/Low-Beam Changer on page 3-8.
•
Flash-to-Pass. See Flash-to-Pass on page 3-8.
•
N Windshield Wipers. See Windshield Wipers on
page 3-8.
•
L Windshield Washer. See Windshield Washer
on page 3-9.
•
J
Cruise Control. See Cruise Control on
page 3-10.
Turn and Lane-Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will automatically
return to the off position.
To signal a lane change, raise or lower the lever until
the arrow starts to flash. Hold it there until the change is
completed. The lever will return by itself when released.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
As you signal a turn or a lane change, if the arrows
flash more quickly than normal, a signal bulb may
be burned out and other drivers will not see your
vehicle’s turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when signaling
a turn, check for a burned-out bulb or a blown fuse.
For bulb replacement, see Taillamps, Turn Signal,
3-7
2008 - Isuzu 290/370 Owner Manual