4. Insert the hoist end of the extension through the
hole in the rear bumper and into the funnel-shaped
guide.
5. Turn the wheel wrench clockwise to raise the tire
part way up. Make sure the retainer is seated in
the wheel opening and the valve stem is pointing
down. Continue raising the tire, watch to make sure
it does not get caught on the underbody.
If the tire does get caught, loosen two or three turns
and push and pull the tire, then retighten. Repeat
this procedure as many times as needed to ensure
proper storage.
6. When the tire is properly seated to the underbody,
continue turning the wheel wrench clockwise until
you feel the override engage, 2 or 3 skips. You
cannot overtighten the hoist cable.
7. Make sure the tire is stored securely. Push, pull (A),
and then try to turn (B) the tire. If the tire moves,
check to make sure the tire valve stem is pointing
down, then use the wheel wrench to loosen
and then tighten the cable.
5-89
2008 - Isuzu 290/370 Owner Manual
Содержание 2008 i290
