Isuzu 2008 i290, Руководство пользователя

Страница: 56 / 384

1.3. Attach the lower attachments on the child
restraint to the lower anchors (D), if equipped,
in the vehicle. The child restraint instructions
will show you how.
2. If the child restraint manufacturer recommends
that the top tether be attached, attach and tighten
the top tether to the top tether anchor (C).
Refer to the child restraint instructions and
the following steps:
2.1. Pull on the finger
access tab to
remove the
cover to access
the top tether
anchors (C).
2.2. Route the top tether (A) through the loop (B)
at the top of the seatback to attach the top
tether to one of the top tether anchors (C).
3. Tighten the lower anchor attachments and the
top tether. The child restraint instructions will
show you how.
4. Push and pull the child restraint in different
directions to be sure it is secure.
Front Seat — Extended Cab without
Rear Seats
Your vehicle has a right front passenger’s airbag and
a passenger sensing system. The passenger sensing
system is designed to turn off the right front passenger’s
frontal airbag when an infant in a rear-facing infant
seat or a small child in a forward-facing child restraint
or booster seat is detected. See Securing a Child
Restraint in the Right Front Seat Position on page 1-56
and Passenger Sensing System on page 1-68 for
important safety information and additional information
on installing a child restraint in the right front seat
position.
1. See Securing a Child Restraint in the Right
Front Seat Position on page 1-56 for instructions
on installing the child restraint using the safety
belts.
1-52
2008 - Isuzu 290/370 Owner Manual