3. Turn the bulb socket counterclockwise and pull it
straight out of the headlamp assembly.
4. Unplug the electrical connector from the old bulb by
releasing the clips on the bulb socket.
5. Plug in the electrical connector to the new bulb.
6. Place the connector with the new bulb into
the headlamp assembly and turn it clockwise until it
is tight.
Sealed Beam Headlamps
To replace the sealed headlamp bulbs, do the following:
1. Remove the four retainer screws and the retainer.
2. Pull the headlamp assembly toward you and unplug
the electrical connector from it.
3. Remove the old headlamp bulb.
4. Plug the electrical connector into the new
headlamp bulb.
5. Reverse Steps 1 through 2 to reinstall the headlamp
assembly.
5-44
2008 - Isuzu 290/370 Owner Manual
Содержание 2008 i290
