Isuzu 2008 i290, Руководство пользователя

Страница: 323 / 384

{
CAUTION:
Rust or dirt on a wheel, or on the parts to
which it is fastened, can make wheel nuts
become loose after time. The wheel could
come off and cause an accident. When you
change a wheel, remove any rust or dirt from
places where the wheel attaches to the vehicle.
In an emergency, you can use a cloth or a
paper towel to do this; but be sure to use a
scraper or wire brush later, if needed, to get all
the rust or dirt off. See Changing a Flat Tire on
page 5-72.
8. Remove any rust or dirt
from the wheel bolts,
mounting surfaces
and spare wheel.
9. Install the spare tire.
{
CAUTION:
Never use oil or grease on studs or nuts.
Because the nuts might come loose. The
vehicle’s wheel could fall off, causing a crash.
10. Put the wheel nuts back on with the rounded end of
the nuts toward the wheel. Tighten each wheel nut
by hand. Then use the wheel wrench to tighten
the nuts until the wheel is held against the hub.
5-81
2008 - Isuzu 290/370 Owner Manual