36
Fig. 2-2
1
Fig. 2-3
Fig. 2-1
Note:
Highlighting added to improve clarity.
1
2
8
4
6
3
5
7
LOG PLACEMENT
Each log in this gas log set is numbered here to assist in
the log placement procedure.
1.
Prior to log placement, spread the provided embers
evenly over the designated areas on the burner, as
shown in Fig. 2-2.
2.
Set the bottom rear
log #1
at the rear of the grate (Fig.
2-2). Center the log, with its back up against the burner
tabs.
3.
Set the bottom left and right
logs #2-3
at the front of
the burner with the charred ends facing inward. Leave
a small gap in between the two charred ends. (Fig. 2-3).
Center the logs, with their backs up against the burner
tabs. (The bottom left log is longer and will slightly stick
outward more than the bottom right log.)
4.
Position the middle center
log #4
on the left side of the
log set, resting on logs #1 and #2 as shown. Position
the middle center
log #5
in a similar manner (with
more of an angle), toward the center of the log set.
(Fig. 2-4.)
5.
Position the middle right
log #6
on the right side of the
log set, resting on logs #3 and #5 as shown in Fig. 2-5.
6.
Position the top left
log #7
at a slight angle on top of
logs # 4 and #5 as shown. The charred end should rest
downward. Complete log placement by positioning the
top right
log #8
at an angle on top of log #6, with the
bottom end resting in between the charred section of
logs #1 and #2. (Fig. 2-6.)
LOG LIST
1.
Bottom rear log
2.
Bottom left log
3.
Bottom right log
4.
Middle left log
5.
Middle center log
6.
Middle right log
7.
Top left log
8.
Top right log
2
3
5
Fig. 2-4
Fig. 2-6
Final Log Placement
6
7
8
Fig. 2-5
4
embers
ISOFLAMES Gas Log Assembly Instructions (cont.)
Содержание IBV-36
Страница 43: ...43 Notes...
