iMC-S8
– operating instruction
page - 6
1.2 Safety instructions
The stepper-motor-controller iMC-S8 is designed in conformability to
current technical and recognized rules.
The device may only be used if it is in correct condition. Any faults
have to be eliminated immediately. Neither children nor non-
authorized persons are allowed to put the device into operation.
The device may only be used for the intended purpose: control of 2
up to 4 linear or rotational axes with 2-phase stepper motors.
All work with the controller iMC-S8, especially initial operation,
installation as well as external wiring must be executed by authorized
personal regarding electrical industry rules and accident prevention
regulations.
Assembly and use of operating material has to be according to EMC
directive 2014/30/EC and Low voltage directive 2014/35/EC. In case
of in proper use even the observation of the respective rules and
standards does not protect against physical damages and damage to
property.
Do not expose the device to high humidity or high vibrations.
Please take care of the instruction manual. Be sure that all users
know the instructions.
Ignoring the instruction manual can lead to damage, heavy physical
damage or to death.
