ICV 4030 - CNC-Compact-Machine with CAN Controller
Page - 13
8 Malfunctions
malfunction
cause
solution
machine cannot be
turned on
no power supply
check mains supply,
mains plug,
multiple socket
master switch not turned on
turn on
broken fuse
unplug mains plug and
replace fuse (see below)
POWER button
out of function
hood not closed
close hood
emergency stop not unlocked
unlock emergency stop
broken fuse
unplug mains plug and
replace fuse (see below)
software does not
work properly
machine not turned on
turn master switch on
power amplifier not turned on
turn on (POWER button)
driver not installed
install driver
bad connection
check cable connections
machine tool does
not work properly
not enabled by the software
do a system reset and a
reference move
rotary switch not on
turn on machine tool
traverse distances of
axes not correct
spindle pitch does not correspond
to the software settings
change the pitch value in
the software (refer to the
control manual)
9 Accessories
The ICV 4030 CAN suitable accessories can be ordered:
accessorie
item number
dust collector
280110 9001
lighting for working area
280110 9004
graving pad
280120 9003
length calliper
280120 9010
spray-cooling system
280220 9012
rotary unit
e.g. 263013 0001
drilling and milling machine 500 W
420003 2050
drilling and milling machine 1050 W 420003 1050
clamping fixture
e.g. 690001
stop rail
e.g. 290021 0175
milling cutter
e.g. 804110 5000
Make sure all accessories are correctly installed and follow applicable norms and safety
regulations. You will find installation and operating instructions for the accessories in the
appendix.
For further information or order placements please turn to our
technical consulting service.
