ICV 4030 - CNC-Compact-Machine with CAN Controller
Page - 3
3 Setting Up and Connecting
The machine will be delivered ready assembled on a pallet. The scope of delivery of the
ICV 4030 includes :
housing, including three linear drive units
complete control electronics
drilling and milling spindle with 3mm collet chuck
chuck key, size 22
clamping set (hand lever, stop rail, 5mm-Allan key)
triangular wrench to unlatch the hood switch
line cord, connecting line from PC to machine
quad socket with lighted master switch
ProNC or RemoteWin software (optional)
CAD/CAM-software
isy
-CAM (optional)
the present user manual
the required space for the machine amounts to its exterior dimensions and sufficient space
for operating and setting the machine on the front side. Allow some 10cm on the back side
for the plugs. The housing hood opens upwards, total hight requirement is some
1.2 meters.
dimensions and space requirement
Keep the triangular wrench off-machine, above all during transportation.
The
clamping set
consists of a hand lever
–
clamping mechanism and two stop rails including
fixing material for the T-slot plate.
Always make sure that the workpieces are well
fixed.