ICV 4030 - CNC-Compact-Machine with CAN Controller
Page - 6
5 Starting Up
5.1 Prearrangements
5.1.1 Operating the integrated control-PC
For operating the control-PC you need:
a screen with VGA attachment
PS2/USB mouse
PS2/USB keyboard
5.1.2 Installing the software
For programming and running the control system of the machine the ProNC or RemoteWin
software is needed.
In case the included software has not yet been installed and adjusted in the factory, please
refer to the notes regarding software installation on the installation-CD.
5.1.3 Coordinate system
The machine´s coordinate system is defined as shown in the picture below. You can freely
select and move the starting point PO on the workpiece through the software .
However, the machine´s reference point (machine zero point) from the factory is set to the
front (Y) left (X) and top (Z) of the machine.
stickers on the machine identify the axes.
