ICV 4030 - CNC-Compact-Machine with CAN Controller
Page - 5
As to lubricating the X-axis, move the slide to the left*, remove the plastic plug at the left
side of the machine and grease through the now visible lubricator nipple.
Again, the guiding rails are accessible through the sealing lips.
With regard to the Z-axis, first remove the machine tool from its fixture then remove the
three plugs and push the slide all the way down. * Through the two lateral openings, some
lubricant can be applied onto the guiding rails .
Behind the front opening you will find the lubricator nipple for the drive.
* While the machine is turned off, the slide can be moved manually.
