6
SAFETY
BASIC PRINCIPLES
USE
MAINTENANCE
attempting to repair it yourself. The use of
original spare parts is mandatory. Irinox accepts
no responsibility for the use of non-original spare
parts.
If the equipment is fitted with wheels, be
careful not to push the equipment violently
while moving it, to prevent it from tipping over,
being damaged and damage anything else, also
pay attention to any roughness in the sliding
surface.
The equipment fitted with wheels cannot be
levelled, so make sure that the support
surface is perfectly horizontal and flat.
During normal use, always lock the wheels with
the special brakes.
Specific warnings for maintenance
and disposal
Extraordinary maintenance operations (e.g.
replacement of faulty components) are
reserved for specialized maintenance personnel.
The operator must limit himself to the normal
routine cleaning of the surfaces, complying with
the following warnings and the methods
indicated in the specific chapter.
When maintenance and cleaning operations
are carried out, the blast chiller must be
turned off and disconnected from the power
supply, and the operator must be at all times in a
position to verify that no connection is restored.
A sign must be placed near the cable with
the blast chiller power supply, indicating
that disconnection has taken place as a
maintenance or cleaning operation is in progress,
and the power supply must not be restored.
The operator in charge of cleaning must be
provided with adequate personal protective
equipment (see chapter
“Personal protective
equipment (PPE): what they are and why they
should be used”
on page
8
).
It is absolutely forbidden to use solvents or,
in general, flammable substances for
cleaning the parts of the blast chiller.
The substances used for cleaning and
disinfecting the surfaces of the blast chiller
must be compatible with the materials of the
blast chiller and with hygiene requirements.
We recommend using mild soap or detergents.
Do not remove the blast chiller protections
to perform maintenance and cleaning
operations.
Make sure you have completely dried the blast
chiller before use.
When disposing of the blast chiller, it is
necessary to destroy its identification plate,
as well as the documentation provided for
purchase.
