16
SAFETY
BASIC PRINCIPLES
USE
MAINTENANCE
Use
Safety warnings
Read this manual carefully before operating the machine. If you have not understood all the
contents of the manual, contact Irinox before using the appliance.
From its default working position, the operator using the equipment can maintain full control of
all the control devices of the same.
Any small movements of the same must be carried out only with the machine disconnected from
the power supply for ordinary cleaning operations.
In order to prevent the risks generated by the blast chiller, all operators who come into contact
with it must be equipped with adequate personal protective equipment as stated in these
instructions (see chapter
“Personal protective equipment (PPE): what they are and why they
should be used”
on page
8
).
The operation and use of the blast chiller must be carried out by only one qualified operator at a
time; the presence of other people must be absolutely avoided as it constitutes a source of
danger. it is the operator's responsibility to check that this condition is always complied with.
All operators who use the blast chiller must know and understand the requirements contained
in this manual, as well as have been previously trained.
The knowledge of the provisions relating to use, given in this chapter, is subject to the basic
knowledge of the blast chiller, which is acquired by reading the previous chapters.
All troubleshooting operations or repairs must be carried out by specifically authorized
maintenance personnel.
The operator in charge of the operation must in no case open or remove the protections and
guards of the blast chiller. If you believe that a malfunction exists, you must have the
maintenance technician intervene and operate according to the provisions of the relevant
instructions.
Before turning on the appliance
Before starting to use the blast chiller, however, check that:
• the equipment is not stopped for maintenance, or cleaning;
• the equipment is connected to the power supply;
• all possible guards are correctly closed and intact;
• the control devices are fully efficient.
