30
Downtime
During periods of inactivity, disconnect the power supply.
Protect the external steel parts of the equipment by wiping
them with a soft cloth soaked in Vaseline oil. Leave the door
ajar in order to ensure proper air exchange.
Upon recovery, before use:
• thoroughly clean the equipment and accessories;
• reconnect the equipment to the power supply;
• check the equipment;
• restart the appliance for at least 60 minutes without any
food inside.
End of life disposal
Disconnection from the electrical and hydraulic circuits must
only be carried out by qualified technicians. If present, recover
and correctly dispose of:
refrigerant gas;
non-freezing solutions present in hydraulic circuits,
preventing spills or leaks into the environment.
Pursuant to art. 13 of Legislative Decree No. 49 of 2014
“Implementation of the WEEE Directive 2012/19/EU on
electrical and electronic waste”
IT08020000000615
The barred bin specifies that the product was
placed on the market after 13 August 2015 and
that at the end of its useful life it must not be
treated as other waste but must be disposed of
separately.
All the appliances are made of recyclable metal materials
(stainless steel, iron, aluminium, galvanized sheet, copper,
etc.) in a percentage greater than 90% by weight. Make the
equipment unusable for disposal by removing the power
cable and any compartment or cavity closing device (where
present). It is necessary to pay attention to the management
of this product at its end of life by reducing negative impacts
on the environment and improving the efficiency of use
of resources, applying the principles of “polluter pays”,
prevention, preparation for reuse, recycling and recovery.
Please note that the abusive or incorrect disposal of the
product entails the application of the penalties provided for
by the current legislation.
Information on disposal in Italy
In Italy WEEE equipment must be delivered:
to Collection Centres (also called ecological islands or
ecological platforms)
to the dealer where you buy new equipment, which is
required to collect it free of charge (“one on one” collection).
Information on disposal in European Union
countries
The EU WEEE equipment directive has been transposed
differently by each country, therefore if you want to
dispose of this equipment we suggest you contact the local
authorities or the dealer to ask for the correct method of
disposal.
Building materials
Stainless steel: construction of the case;
Plastic parts;
Refrigerant gas: in the refrigeration circuit;
Compressor oil: in the cooling circuit;
Copper: electrical system and cooling circuit.
SAFETY
BASIC PRINCIPLES
USE
MAINTENANCE
