19
F10
3
2
4
1
5
F10
MANUAL mode
(timed)
1
Press the relative key to select the
timed mode
(the
cycle is interrupted when the set time has elapsed).
Insert the products to be treated in the cell and close the
door.
2
The screen displays:
• the
temperature in the cell
(in the example 33°C | 92°F)
• the
expected cooling or freezing time
(in the example
3 hours and 30 minutes); if necessary, it is possible
to modify this default time by pressing the
“+”
or
“-”
keys (keeping the key pressed for over two seconds will
increase the time more quickly.)
3
Press the
“START”
key to start the cycle.
4
In the screen that appears, the cycle in progress is
shown on the top left (e.g. de3°C | 37°C) and on
the right the percentage of completion (e.g. 90%).
5
Pressing the symbol displays for 3 seconds:
• the air temperature,
• the temperature detected by the core probe
• the cycle duration.
Pressing
the screen is put into stand-by but the cycle
continues.
At the end of the set time, the cycle ends and an acoustic
signal is emitted.
To interrupt the cycle prematurely, press the
“STOP”
key.
ed. 11 | 2020
