ipf electronic PY740025, Руководство пользователя

Страница: 38 / 67

MANUAL [ PY740025/26 ]
•
Subject to alteration! Version: 22.10.2018
ipf electronic gmbh • Kalver Straße 25 - 27 • 58515 Lüdenscheid │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │ info@ipf.de •
www.ipf.de
38
5.10.3 WINDOW P1
Window point 1 (for the WINDOW mode) is selected in mm using the arrow keys. The point must lie within the
measuring range (greater than start of measuring range Sdc
1
+2x hysteresis
1
).
5.10.4 WINDOW P2
Window point 2 (for the WINDOW mode) is selected in mm using the arrow keys. The point must lie within the
measuring range (less than end of measuring range Sde
1
-2x hysteresis
1
).
5.10.5 LEVEL
The output level can be inverted with active high or active low here.
1
According to data sheet chapter 6.1
NOTE
If MEAS TYPE is changed, the switching output settings are discarded. The
factory settings are restored for DIGITAL OUT = End of measuring range Sde 1 .