ipf electronic PY740025, Руководство пользователя

Страница: 22 / 67

MANUAL [ PY740025/26 ]
•
Subject to alteration! Version: 22.10.2018
ipf electronic gmbh • Kalver Straße 25 - 27 • 58515 Lüdenscheid │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │ info@ipf.de •
www.ipf.de
22
• “End of measuring range”
1
of the sensor represents the standard reference for angle measurement.
Once the reference surface with FLEX MOUNT is teached, “End of measuring range” is no longer
valid. The new reference surface corresponds to 0° tilt angle.
•
Displayed are for the edge position always the values for the object or the reference surface with the
smallest distance to “Start of measuring range”
1
.
•
The requirements for the object with respect to the minimum width
1
and height
1
must be met.
• As soon LIVE MONITOR is active, the measuring field is set to maximum and the sensors outputs are
set to “no object in measuring range”. After disabling LIVE MONITOR the last valid settings are
applied again.
1
According to data sheet chapter 6.1
NOTE
An angle of 0° with FLEX MOUNT activated means that the top surface of the
object is parallel to the reference surface.
NOTE
If there is no object within the measuring range during LIVE MONITOR or the
minimum requirements for the object are not met, the sensor displays ----mm.
NOTE
When several objects are in the measuring range, the object with the shortest
distance from the start of measuring range is the reference object.