iota Sciences isoHub, Руководство пользователя

Страница: 27 / 33

26
Figure 7: The image acquisition areas of camera adapters compared with observation area by the eyepieces (field
number 22).
10 Maintenance
10.1 Cleaning
Users are recommended to clean the exterior of the isoHub regularly, ideally before and after each
use. iotaSciences recommend the use of a paper towel, dampened with 70% ethanol.
Care should be taken to ensure that excessive volumes of cleaning fluid are not used
on the isoHub, as excess fluid entering the isoHub may lead to degraded performance
or electrical safety risk.
Use the provided dust cover when isoHub not in use to prevent dust.
11 Troubleshooting
Problem Cause Remedy
The field of view is dark. isoHub is not switched on or is
asleep.
Turn on the isoHub (see section
4.1 ), or if asleep, touch the
touchscreen or use the controller
to wake the isoHub up (see
section
4.11 ).
The light intensity is set to the
minimum, or not adjusted
correctly. Rotate the brightness adjustment
knob to adjust the brightness (see
section
7.6 ).
The phase contrast slider isn’t
inserted properly.
Adjust the phase contrast slider to
use either the empty hole for