iota Sciences isoHub, Руководство пользователя

Страница: 10 / 33

9
Do not manoeuvre by holding the eyepieces, light source, stage or the focusing knobs,
as this may cause damage to the isoHub.
Do not carry the isoHub with a specimen on the stage.
3.2.2 Attach the condenser portion
If using the isoHub with the fluorescence option, then attach the umbra shield to the
condenser portion before attaching the condenser portion to the isoHub
– see the
isoHub fluorescence user manual available from the iotaSciences customer portal for
more details.
Loosen the condenser fixing knob [a] to the
extent that it does not fall off.
Hold the condenser diagonally, contact the
attaching portion on the top surface [b] of the
condenser to the round dovetail portion on
the bottom of the column and fit it.
Rotate the condenser and set the condenser
fixing knob [a] at the right side position
approximately. Then, tighten the condenser fixing knob [a] to secure it.
3.2.3 Insert phase contrast slider
Set the phase contrast slider [b] with the
surface where the texts are described facing
up, and insert it in the phase contrast slider
hole [a] of the condenser portion.
Align the empty hole in the light path for
bright field observation, or the pre-centred
phase contrast ring for phase contrast
observation.