iota Sciences isoHub, Руководство пользователя

Страница: 11 / 33

10
3.2.4 Attach objectives
Remove the stage centre plate or the heated
centre plate - if using the heated centre plate,
then first detach the cable from the back of the
isoHub (see
Figure 2 ).
Attach the objectives to the revolving
nosepiece. It is recommended to insert the
objectives into the revolving nosepiece so that
the magnification increases clockwise when
viewing the revolving nosepiece from above.
Attach caps to screw holes [a] of the revolving nosepiece where no objectives are attached to
avoid dust or dirt getting on the lenses.
After all objectives and caps are attached, fit the stage centre plate or the heated centre plate into
the stage.
If using the heated centre plate, then reconnect the heater cable at the back of the isoHub.
When removing the objectives, follow the procedures opposite to those of attaching.
3.2.5 Attach controller
Insert controller cable into the controller USB
port [a] at the back of the isoHub.
Insert the controller into the cradle [b] to the
right of the touch screen.