iota Sciences isoHub, Руководство пользователя

Страница: 12 / 33

11
3.2.6 Insert power cord
Insert power cable into the power supply.
Insert the cable from the power supply into the
power port [a] at the rear of the isoHub.
Connect the power supply's plug to the power
outlet.
3.2.7 Attach 60mm dish holder or well plate holder
Press points [a] and [b] together.
Slide the 60mm dish holder [c] or the well plate
holder into position and release points [a] and
[b].
Ensure the 60mm dish holder or well plate
holder are flat on the stage.
4 Using the isoHub
4.1 Powering-on
To power-on the isoHub, ensure that it is
connected to a suitable mains power socket by
the supplied mains power cable and 24V
power supply (see Section
3.2.6 ). Push the
power switch to the on position (located at the
back of the isoHub on the left-hand side).
After a few seconds, the isoHub touchscreen
will display the home screen (see
Figure 3 ).