INVT Goodrive 200A, Руководство по эксплуатации

Страница: 93 / 162

Goodrive200A inverters Function parameters
88
Function
code
Name Detailed instruction of parameters
Default
value
Modify
communication is not applied.
0: No check (N,8,1) for RTU
1: Even check (E,8,1) for RTU
2: Odd check (O,8,1) for RTU
3:No check (N,8,2) for RTU
4: Even check (E,8,2) for RTU
5: Odd check(O,8,2) for RTU
6: No check (N,7,1) for ASCII
7: Even check (E,7,1) for ASCII
8: Odd check (O,7,1) for ASCII
9:No check (N,7,2) for ASCII
10: Even check (E,7,2) for ASCII
11: Odd check(O,7,2) for ASCII
12: No check (N,8,1) for ASCII
13: Even check (E,8,1) for ASCII
14: Odd check (O,8,1) for ASCII
15:No check (N,8,2) for ASCII
16: Even check (E,8,2) for ASCII
17: Odd check(O,8,2) for ASCII
P14.03
Answer
delay
0~200ms
It means the interval time between the interval
time when the drive receive the data and sent it
to the upper monitor. If the answer delay is
shorter than the system processing time, then the
answer delay time is the system processing time,
if the answer delay is longer than the system
processing time, then after the system deal with
the data, waits until achieving the answer delay
time to send the data to the upper monitor.
5
○
P14.04
Fault time of
communicati
on overtime
0.0(invalid), 0.1~60.0s
When the function code is set as 0.0, the
communication overtime parameter is invalid.
When the function code is set as non-zero, if the
interval time between two communications
exceeds the communication overtime, the
system will report “485 communication faults”
(CE).
Generally, set it as invalid; set the parameter in
the continuous communication to monitor the
communication state.
0.0s
○
P14.05 Transmission 0:Alarm and stop freely 0
○