INVT Goodrive 200A, Руководство по эксплуатации

Страница: 66 / 162

Goodrive200A inverters Function parameters
61
Function
code
Name Detailed instruction of parameters
Default
value
Modify
make the password protection invalid.
After the user’s password becomes valid, if the
password is incorrect, users cannot enter the
parameter menu. Only correct password can
make the user check or modify the parameters.
Please remember all users’ passwords.
Retreat editing state of the function codes and
the password protection will become valid in 1
minute. If the password is available, press
PRG/ESCto enter into the editing state of the
function codes, and then “0.0.0.0.0” will be
displayed. Unless input right password, the
operator can not enter into it.
Note: Restoring to the default value can clear the
password, please use it with caution.
P07.01
Parameter
copy
The function code determines the mode of
parameters copy.
0:No operation
1:Upload the local function parameter to the
keypad
2:Download the keypad function parameter to
local address(including the motor parameters)
3:Download the keypad function parameter to
local address (excluding the motor parameter of
P02 group)
4:Download the keypad function parameters to
local address (only for the motor parameter of
P02 group)
Note: After completing the 1~4 operation, the
parameter will come back to 0 automatically, the
function of upload and download excludes the
factory parameters of P29.
0
◎
P07.02
QUICK/JOG
function
selection
0:No function
1: Jogging. Press QUICK/JOG to begin the
jogging running.
2: Shift the display state by the shifting key.
Press QUICK/JOGto shift the displayed function
code from right to left.
3: Shift between forward rotations and reverse
rotations. Press QUICK/JOG to shift the direction
of the frequency commands. This function is only
1
◎